GAUGE -30/0/70 CBM.NPT

Part No. 10181522CC

 


This part belongs to the assemblies below :

MEDIA FILTER ASSY -4 HS/AW/UW B071080002
Multi Media Filter *** contains a media filter bed (gravel and sand). The media traps suspended solids larger than 30 micron. The Multi Media Filter is back washable.

  • Multi Media Filter (optional) is supplied pre-mounted to its own base.
  • Mount the Multi Media Filter base onto a flat horizontal surface and secure the base in place using the supplied mounting hardware.
  • Mount the assembly below water level to minimize feed pressure loss.
  • Waste Discharge of Multi-Media Filter to Overboard Dump Fitting.
  • Connect the inlet to the Booster Pump Outlet or Fresh Water Flush Outlet.
  • Connect the Outlet to the Commercial Prefilter Inlet.
  • Connect the Media Filter Waste Fitting to the Over Board Fitting.
  • Unscrew the Multi Media Fill Plug, located on top of the Multi Media Filter Lid.
  • Place a funnel over the Fill Hole.
  • Pour into the funnel approximately 15 lbs (7 kg) of small gravel (1/8 x 1/4 inch) first (on the bottom) then approximately 26 lbs (12 kg) of #20 silica sand last (on top of the small gravel).
  • Remove the funnel and clean the Fill Plug female threads.
  • Screw the Fill Plug back onto the Lid and tighten lightly with a wrench.
  • Note this Fill Plug is O-ring sealed and requires only light tightening to seal the O-ring.
  • Backwash Multi-Media Filter before operating the system.

PREFILTER ASSY W/GAUGE HORIZON SEAFARI  H2108200002
CONTROL MANIFOLD ASSEMBLY H22502210004
CONTROL MANIFOLD ASSEMBLY H22502210005

€ 47,32

Loading Updating cart...
LoadingUpdating...