Select Page

BOOSTER PUMP ASSY 12VDC AW170

$804,00

Part no. B016220001 Categories: , , ,

Description

BOOSTER PUMP ASSY 12VDC AW170
Part No. B016220001

This part is compatible with the following systems:
SEAFARI MINI 170-750
AQUA WHISPER MINI
PRO MINI

Overview

Booster Pump supplies a positive pressure to the Pre-filters, and through to the High Pressure Pump. The Horizon Seafari utilizes a pump with a performance curve of 80 Ft Head (35 psi) at 4.2 GPM. The resulting pressure at the High Pressure Pump depends on the final configuration.

  • To Booster Pump Inlet The Booster Pump is a centrifugal pump and it is not self-priming.
  • The booster pump volute must be fully filled with water in order for the booster pump to operate properly.
  • Any air present in the pump prevents the water from flowing.
  • Mounting the booster pump below water level ensures that air never enters the booster pump volute.
  • For best results, install the Booster Pump Below Water Level and close to the Sea Strainer, if installed.
  • The Booster Pump may be mounted either horizontally or vertically.
  • If mounted vertically, the Wet End MUST be mounted DOWN (on bottom).
  • If mounted vertically (with the wet end on top) the motor may develop an electrical short should the wet end of the Booster Pump leak.
  • Connect the Booster Pump inlet to the Sea Strainer Outlet or Sea Cock valve, or if the Inlet Rinse/Clean Valve is installed then connect the Booster Pump Inlet to the Center (common) port of the Inlet Clean/Rinse Valve.
  • Keep this line as short and straight as possible.
  • Avoid up and down loops, 90° elbows, and hose kinks.

Downloads

Here you will find the exploded part view per water maker system. For each download, we have indicated on which page you can find the article. If you have any questions after reading this information, please do not hesitate to contact us.

Seafari mini 170-750 – page 21, 23 & 25
Aqua Whisper Mini – page 31, 33, 35 & 36
Pro mini – page 31, 33, 35 & 36

AquaControl Marine